Showing all 6 results

Transcend 1TB M.2 2280 PCIe Gen4x4 NVMe 3D TLC

KSh18,999.00 + VAT
  1. Capacity: 1TB - This indicates the storage capacity of the SSD, which is 1 terabyte.
  2. Form Factor: M.2 2280 - This refers to the physical size and connector of the SSD. M.2 is a form factor, and 2280 specifies the dimensions (22mm width, 80mm length).
  3. Interface: PCIe Gen4x4 - This indicates the interface type, which is PCIe (Peripheral Component Interconnect Express) and specifically Gen4x4. PCIe Gen4 offers faster data transfer rates compared to its predecessor, Gen3.
  4. NVMe: NVMe stands for Non-Volatile Memory Express, and it is a protocol designed for accessing high-speed storage media, such as SSDs, over a PCIe bus. NVMe drives are faster than those using older protocols like SATA.
  5. 3D TLC: This refers to the type of NAND flash memory used in the SSD. TLC stands for Triple-Level Cell, and 3D indicates that it uses three-dimensional stacking technology. This technology allows for higher storage capacity and better performance compared to traditional planar NAND.

Transcend 1TB, 2.5″ SSD, SATA3, QLC

KSh13,599.00 + VAT
  1. Capacity: 1TB - This indicates the storage capacity of the solid-state drive, which is 1 terabyte.
  2. Form Factor: 2.5" - The SSD is designed to fit into a standard 2.5-inch drive bay, making it suitable for use in laptops and desktops.
  3. Interface: SATA3 (SATA III) - This refers to the type of connection the SSD uses to communicate with the computer. SATA III is the third generation of the Serial ATA interface, providing faster data transfer rates compared to its predecessors.
  4. QLC (Quad-Level Cell) - QLC is a type of NAND flash memory technology used in SSDs. It stores four bits of data in each memory cell, allowing for higher storage capacities at a lower cost per gigabyte. However, QLC generally has lower performance and endurance compared to other NAND technologies like TLC (Triple-Level Cell) or MLC (Multi-Level Cell).

Transcend 2TB XS70 Nvme PCIe Gen4 M.2 2280 SSD metal heats

KSh31,499.00 + VAT
  • PCIe Gen 4x4 interface with read speeds up to 7,300MB/s and write speeds up to 6,800MB/s
  • Unique heatsink design provides maximum heat dissipation for PS5
  • NVMe 1.4 support allows for higher performance, lower latency, and lower power consumption
  • TBW: 1400
  • 5-year limited warranty *The SSD warranty is based on the TBW or Warranty period. Please click here for more information about Silicon Power Warranty Policy.

Transcend MTE220S 2 TB NVMe PCIe Gen3 x4 M.2 2280

KSh26,499.00 + VAT
  1. Capacity: 2TB
  2. Form Factor: M.2 2280 (22mm in width, 80mm in length)
  3. Interface: PCIe Gen3 x4 NVMe
  4. Read Speeds: Up to a certain MB/s (specific speeds depend on the model and can change with firmware updates)
  5. Write Speeds: Up to a certain MB/s (specific speeds depend on the model and can change with firmware updates)
  6. NAND Flash: Utilizes 3D NAND technology for storage.
  7. MTBF (Mean Time Between Failures): A measure of the reliability of the SSD.

Transcend TS2TMTE250S 2TB M.2 PCIe Gen4x4 2280 NVMe

KSh30,550.00 + VAT
  1. Capacity: 2TB
  2. Form Factor: M.2 2280
  3. Interface: PCIe Gen4 x4 NVMe
  4. Speeds: It utilizes the PCIe Gen4 interface, providing significantly higher data transfer speeds compared to PCIe Gen3 SSDs. Actual read and write speeds may vary based on various factors.

Vention M.2 NVMe SSD Enclosure (USB 3.1 Gen 2-C) Gray Aluminum Alloy Types(KPGH0)

KSh4,200.00 + VAT
KPGH0 Vention M.2 NVMe SSD Enclosure (USB 3.1 Gen 2-C) Gray Aluminum Alloy Types   Key Features;
  • Case Material: Aluminum
  • Plug Type: EU plug
  • Supporting Hard Drive Capacity: 2TB
  • External Interface: USB
  • Internal Interface: SATA
  • Model Number:  KPGH0
  • Package: Yes
  • Size: 1.8"
  • Model Name: Vention M.2 Nvme SATA SSD Case
  • Transmission Rate: 10Gbps
  • Product Size: 112.44mm*36.8mm*12mm