Shopping cart is empty!
Ubiquiti Bullet M2 Titanium 2.4GHz Zero-Variable Outdoor Radio
Highlights:
Key Features
- Ubiquiti Bullet M2 HP 802.11b/g/n 600mW
- High Performance 802.11a/n radio architecture
- Ubiquiti AirOS software.
- 2.4GHz Outdoor High Power Wireless Access Point/Bridge
- Features up to 600 mW of power and an enhanced receiver design for PtP or PtMP deployment
- Ubiquiti Bullet M2HP provides high performance at a range of up to 50+ km, depending on its antenna
Ubiquiti EdgeRouter X (ER-X) Router
Highlights:
Ubiquiti EdgeRouter ER-X Key Features
The Ubiquiti EdgeRouter ER-X combines carrier-class reliability with excellent price‐to‐performance value in an ultra‐compact form factor. The ER-X can be powered by an external power adapter or 24V passive PoE input. A passive PoE passthrough option is available to support a single airMAX device.
- 5 Gigabit RJ45 ports
- Passive PoE passthrough option
- Power via 24V passive PoE or power adapter
- Ports configurable for line-rate, Layer-2 switching
- 130 kpps for 64-byte packets
- 1 Gbps for 1518-byte packets
Powered by a proprietary and intuitive graphical interface, EdgeOSTM, the ER-X can easily be configured for the routing, security, and management features required to efficiently run your network. For advanced network professionals, an integrated CLI is available for quick and direct access using familiar commands.
The Dashboard displays detailed statistics: IP information, MTU, transmit and receive speeds, and status for each physical and virtual interface.
Ubiquiti NanoStation M2 – Wireless Access Point
Highlights:
Key Features
- Networking Interface: (1) 10/100 Ethernet Port
- Processor Specs: Atheros MIPS 24Kc, 400 MHz
- Memory: 32 MB SDRAM, 8 MB Flash
- Frequency: 2.4 GHz
- Cross-pol Isolation: 20 dB Minimum
- VSWR: 1.4:1
- Beamwidth: 60? (H-pol) / 60? (V-pol) / 60? (Elevation)
- Polarization: Dual Linear
Ubiquiti NanoStation M5 (NSM5)
Highlights:
Key Features
- Time Division Multiple Access, integrated airMAX? (MIMO TDMA protocol) technology.
- Dual Ethernet, 4 LED signal strength indicator, Intelligent POE, Capable of high-speed, carrier-class links
- Frequency Range: 5.745-5.825 Ghz, Gain 16 dBi, Max Power Consumption 8W
- Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller
Ubiquiti Networks NanoStation locoM2 Indoor/Outdoor airMAX CPE
Highlights:
Key Features
- Atheros MIPS 4KC, 180 MHz Processor
- 16MB SDRAM, 4MB Flash Memory
- 1 x 10/100 BASE-TX Ethernet Interface
- 8dBi Antenna
- Over 16404′ Range
- AirOS Software
- FCC Part 15.247, IC RS210 Approved
- RoHS Compliant
Ubiquiti Networks NanoStation locoM5 Indoor/Outdoor airMAX CPE
Highlights:
Key Features
- Atheros SOC, MIPS 4KC, 180 MHz Processor
- 16MB SDRAM, 4MB Flash Memory
- 1 x 10/100 BASE-TX Ethernet Interface
- 13dBi Antenna
- Over 16404′ Range
- AirOS Software
- FCC Part 15.247, IC RS210 Approved
- RoHS Compliant
Ubiquiti Networks U-POE-AT PoE+ Adapter 48V DC @ 0.65A
Highlights:
Ubiquiti Networks U-POE-AT PoE+ Adapter 48V DC @ 0.65A
The Ubiquiti Networks U-POE-AT is a Power over Ethernet (PoE) adapter designed to provide power to compatible devices over an Ethernet cable. In this case, the U-POE-AT delivers PoE+ (Power over Ethernet Plus) with a power output of 48V DC at 0.65A.
Here’s a breakdown of the specifications:
- Voltage Output: 48V DC
- Current Output: 0.65A
- PoE Standard: This adapter supports the PoE+ standard, which is also known as 802.3at. PoE+ provides higher power levels compared to the original PoE standard (802.3af), making it suitable for devices that require more power, such as certain IP cameras, access points, and other network devices.
Ubiquiti Networks UAP-AC-HD-US Wi-Fi Access Point
Highlights:
Key Features
- 802.11ac Wave 2 Wi-Fi Standards
- 2 x 10/100/1000 Ethernet Ports
- 4×4 Spatial Streams
- UniFi Controller Software
- Integrated Omni Antennas
- Guest Portal/Hotspot Support
- Passive Power over Ethernet
- 500+ Concurrent Clients
- Reset Button
- CE, FCC, IC Certified
Ubiquiti Networks UAP-AC-IW-US UniFi Access Point
Highlights:
Key Features
- 802.11 a/b/g/n/ac Wi-Fi Standards
- Range of up to 328′
- 3 x 10/100/1000 Ethernet Ports
- UniFi Controller Software
- Integrated Omni Antennas
- Guest Portal/Hotspot Support
- Passive Power over Ethernet
- 200+ Concurrent Clients
- Reset Button
- CE, FCC, IC Certified
Ubiquiti Networks UAP-AC-LITE UniFi Access Point
Highlights:
Key Features
- 802.11 a/b/g/n/ac Wi-Fi Standards
- Range of up to 400′
- 1 x 10/100/1000 Ethernet Ports
- UniFi Controller Software
- Integrated Omni Antennas
- Guest Portal/Hotspot Support
- Passive Power over Ethernet
- 200+ Concurrent Clients
- Reset Button
- CE, FCC, IC Certified
Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Access Point
Highlights:
Key Features
- 802.11 a/b/g/n/ac Wi-Fi Standards
- Range of up to 600′
- 2 x 10/100/1000 Ethernet Ports
- UniFi Controller Software
- Integrated Omni Antennas
- Guest Portal/Hotspot Support
- Passive Power over Ethernet
- 200+ Concurrent Clients
- Reset Button
- CE, FCC, IC Certified
Ubiquiti Networks Unifi (UAP-AC-EDU) 802.11 AC Dual-Radio Access Point
Highlights:
Key Features
- 2.4 GHz Speed: 450 Mbps. 5 GHz Speed: 1300 Mbps. Environment: Indoor.
- Networking Interface: Dual-Band Wi-Fi / Gigabit Ethernet.
- Power Method: Passive Power over Ethernet (48V), 803.2at Supported (Supported Voltage Range: 44 to 57VDC).
- Dimensions: 287.5 x 287.5 x 125.9 mm (11.32 x 11.32 x 4.96 inches). Weight: 1.820 kg (4.012 lb).
- Package Contents: Unifi AC EDU Access Point with Public Address System, Gigabit PoE Adapter (48V, 0.5A), Mounting Template, Quick Start Guide.